This is the new KRE 1964-1968 aluminum Pontiac timing cover! This Pontiac timing cover is made by precision sand casting 356-T6 aluminum and comes with the following features:
Tin Indian Performance Crank Seal installed
heater nipple drilled
Has 0, 6, and 12 degree timing marks like the '69 and up KRE T cover
Fully 5 axis CNC machined
Has the dimple for Tripower intake manifolds
Accepts ALL standard Pontiac parts from 1964-1968
| - fuel pumps and block offs |
| - water pump sleeves |
| - water pumps |
| - water pump divider plates (both stock and aftermarket) |
Intake manifold crossover hole is sized for 1/8 pipe tap should you want to block it off
Cast and machined in the U.S.A
| KRE 64-68 Standard Early Pontiac Timing Cover |
| KRE-014E |
This is the new KRE aluminum Pontiac timing cover! This Pontiac timing cover is made by precision sand casting 356-T6 aluminum. The timing cover comes with the following features:
Tin Indian Performance Crank Seal installed
Heater nipple drilled
Has 0, 6, and 12 degree timing marks like the original 1969 Pontiac timing cover
Fully 5 axis CNC machined
Accepts ALL standard Pontiac parts from 1969 and up
| - fuel pumps and block offs |
| - water pump sleeves |
| - water pumps |
| - water pump divider plates |
Intake manifold crossover hole is sized for 1/8 pipe tap should you want to block it off
Cast and machined in the U.S.A
Motor plate version NOW available!
|
KRE 1969 - up Standard Timing Cover |
|
KRE-014 |
|
|
Don't forget the these important parts when installing the new KRE Pontiac Timing Cover!
Pontiac water pump divider plate
Pontiac water pump sleeves
Pontiac timing cover gasket
Oil pan lip gasket
water pump
water pump gasket
fuel pump gasket
Pontiac Water Pump Divider - Late
 |
 |
|
These are our new Pontiac water pump dividers! These water pump dividers are placed behind the water pump in the timing cover for use with a stock style water pump on 1969 and up Pontiac timing covers. These water pump divider plates are essential to efficient stock water pump operation. This is a frequently overlooked part in your Pontiac's cooling system. If your replacing your water pump you should inspect and replace this water pump divider if necessary. This replaces GM part # 9796349 |
| WP-001 |
Pontiac Water Pump Divider - Early
|
|
These are our early Pontiac water pump dividers! These water pump dividers are placed behind the water pump in the timing cover for use with a stock style water pump on 1968 and earlier Pontiac timing covers. These water pump divider plates are essential to efficient stock water pump operation. This is a frequently overlooked part in your Pontiac's cooling system. If your replacing your water pump you should inspect and replace this water pump divider if necessary. Please note: This divider does NOT use Pontiac water pump sleeves . |
| WP-001E |
Pontiac Water Pump Sleeves
These seals are placed in the timing cover holes for use with a stock style water pump on 1969 and up Pontiac timing covers. These sleeves are essential to efficient water pump operation. This is a frequently overlooked part in your Pontiac's cooling system. If your replacing your water pump you should inspect and replace these sleeves if necessary. These replace GM part # 9796347
| WP-002 |
Pontiac Timing Cover Gasket
These gaskets are made from high quality Interface material and are .035 thick.
|
|
|
TIP-130100 |
Teflon Pontiac Timing Cover Gasket
These gaskets are made from high quality teflon and are .035 thick.
(paper gasket pictured)
|
|
|
TIP-130100T |
Pontiac Water Pump Gasket
These gaskets are made from high quality Interface material and are .035 thick.
|
|
|
TIP-130600 |
Teflon Pontiac Water Pump Gasket
These gaskets are made from high quality Interface material are are .035 thick.
(paper gasket pictured )
|
|
|
TIP-130600T |
Pontiac Fuel Pump Blockoff Gasket
These gaskets are made from high quality Interface material and are .035 thick.
|
TIP-130200 |
Teflon Pontiac Fuel Pump Blockoff Gasket
These gaskets are made from high quality teflon and are .075 thick.
(paper gasket pictured)
|
$5.000 |
|
TIP-130200T |
Pontiac Oil Pan to Timing Cover Lip Gasket
| TIP-130500L |
Pontiac Timing Cover Washer
|
|
| Pontiac Timing Cover Washer - stainless steel |
| TIP-022 |
Pontiac Timing Cover Lift Hook
|
|
| Pontiac Timing Cover lift hook - stainless steel |
| TIP-023 |
Pontiac Water Pumps
| Meziere 100 Series Electric Water Pumps |
| Big-time cooling for big-time
performance! Meziere 100 Series electric water pumps deliver 35-40 gpm of flow. Because they're electric, you won't have the usual horsepower loss at high rpm caused by a mechanical pump's impeller. Plus, their lightweight billet aluminum construction reduces overall engine weight. These pumps also feature CNC-machined aluminum housings, epoxy-coated motor windings, an RF suppression circuit, and a one-piece carbon-ceramic seal. Pumps fit 1969 and up Pontiac timing covers. |
| Meziere Electric Water Pump, 35 gpm, Billet Aluminum, Blue Anodized |
| MEZ-WP103B |
| Meziere Electric Water Pump, 35 gpm, Billet Aluminum, Blackue Anodized |
| MEZ-WP103S |
| Meziere Electric Water Pump, 35 gpm, Billet Aluminum, Polished |
| MEZ-WP103U |
HD Meziere Pump are available on request and normally cost an additional $49.00. Standard pumps are rated at 35 GPM and the HD pumps are rated at 40 GPM.
Flow Kooler Water Pumps
| Flow Kooler Pontiac Water Pump |
| fits 1969 and up Pontiac timing cover |
| TIP-WP-006 |
 |
| Cast Iron Pontiac Water Pump |
| fits 1968 and earlier Pontiac timing cover - 8 bolt pump |
| TIP-WP-006E |
